SED1330


	After over 35 years of development and helping other designers and engineers, The Workbench site will be closing due to age and retirement of members. Sales of certain items in stock will continue until depleted. The basic site will remain open for some time for item documentation. If you have any special request please email.

Support Files

User supplied notes

E-mail for more information

Classified Section Items Available

If you have any projects that you would like displayed, please send E-mail


	DISCONTINUED ITEMS


	A SED1330 based 256x128 Graphic LCD




	*Large display area almost 2.75”H x 5.0”W!*




	The GLiPIC and GLiPIC2 controller for KS0108 based LCDs



				Revision 3 adapter

Overall size (pcb area) 4.5”H x 5.75”W. This Hyundai LCD display is not backlit. However, there seems to be provisions for some type of backlight since there is a 2mm gap between the board and the LCD panel. The SED1330 is a popular controller and has many features. Documentation for the controller is available from numerous sources on the Internet. You can also download it from Epson’s website.


	GLiPIC Board adapter kit for the 256x128 SED1330 LCD (can also be used with T6963C based LCD’s). Two headers are provided a 1x18 and a 2x10. The unit has an on-board 5v to -15v convertor, a MAX637, which supplies LCD negative voltage (Vee). A 20K POT is used for the Vee adjustment.


	Examples of LCD images created using the GLiPIC2 utility, a Windows application designed for use with the PicBasicPro (Ver 2.32) SED1330 programs available in the Benchware section.


	Sed1330 256x128 LCD PIC files written in PBP 2.32 for the above can be downloaded here. These PBP files will work with the Windows application GLiPIC2 and the SED1330 256x128 LCD display. You use the GLiPIC board with the Sed1330 adapter, or your own PIC controller (you may have to change port and pin settings in the software to match your board).


	Other stuff: For an AZDisplay’s SED1520 controlled AGM1232 122x32 graphic display PICBasicPro code to initialize and display characters (includes a 5x7 character set) Click here.


	Bascom-AVR 1.11.62 and ATS908535 code to interface with the SED1330 available here *for free.*


All Rights Reserved, Copyright (c) COMPSys , 2018

		Updated on:

	February 16, 2018

Windows is a registered trademark of Microsoft Corporation. PICMicro is a registered trademark of Microchip Inc.


	AVR is a registered trademark of Atmel Corp., MAX is the trademark of Maxim Corporation