Bluetooth Projects

Support Files

User supplied notes

E-mail for more information

Classified Section Items Available

If you have any projects that you would like displayed, please send E-mail

Carrier boards for the Rayson BTM-182 Class 2 module in serial mode.

BT182

The BTM-182 module is a versatile and inexpensive bluetooth device. It is a Class 2 module with printed pcb
antenna, Bluetooth
standard Ver. 2.0
+ EDR compliant. Low current consumption, 3.0V or 1.8V operation.
Possible Interfaces: USB, UART & PCM (for voice CODEC), RoHS compliant. Small outline. 25.0x14.5x2.2 mm.
The BTM-182 is available from several suppliers including
www.sparkfun.com

Default RS232 parameters:
Baud 19200
Data bits 8
Parity None
Stop Bits 1
(these can be changed ia the AT commands)

BTM-182 Documentation

BT2_top

Defaults:
 Device Name: Serial Adapter
PIN: 1234
(these can be changed ia the AT commands)

The BMT-182 shown mounted on the 3.3v carrier board

BT2_pcb_top

BT3V kit documentaion

BT3VK Includes the pcb and 2 smd capacitors. Also included are 4 optional 10k pull-up resistors. Sold as a kit and requires soldering the parts.

Order: BT3VK $12 kit BTM-182 module not included

Order: BTM182K3V $27 kit Includes the BTM-182 module

BT1_top

The BMT-182 shown mounted on the 5v carrier board

BT1_pcb_top

BT5VK Includes the pcb and 3.3v regulator, 2 MOSFETs, 6 10k resistors, 10uf cap and a 0.1uf cap. Sold as a kit and requires soldering the parts. The BTM-182 module is not included.

Order: BT5VK $15 kit

Order: BT5VA $19 assembled

BT5V kit documentation

Order: BTM182K5V $30 kit of all parts Includes the BTM-182 module

Documentation to connect the module to a PC to change serial parameters using the AT command set

All Rights Reserved, Copyright (c) COMPSys , 2014

Updated on:

January 29, 2014 

Windows is a registered trademark of Microsoft Corporation. PICMicro is a registered trademark of Microchip Inc.

AVR is a registered trademark of Atmel Corp., MAX is the trademark of Maxim Corporation